DARE TO BLEND THE ESSENTIAL WITH THE EXCESSIVE.

Our Cool Modern Collection introduces an entirely different style choice to the AuricSound universe. The brass tone is inspired by contemporary interior design and Art Deco also known as Style Moderne. And just like Art Deco did almost a century ago, this permanent collection fuses technology and decorative art in a celebration of colourful living.

M 5

A musical powerhouse designed to sound great anywhere.

Monitor Speaker System M5

Realizes high transparency and a precise sound image, building on our linear-phase, point-sound-source concept.

Point-Sound-Source Speaker System AuricSound’s newly developed flat coaxial two-way speaker unit combines a tweeter for high frequencies and a woofer for mid-range and bass. Because the tweeter is at the center of the woofer, the speaker acts as a point sound source, providing a coherent, integrated sound across the frequency range, without directional anomalies. As a result, the Technics Speaker System delivers a live superb soundstage focus, excellent imaging and the ambience required to deliver the ‘live music’ experience.

 Phase Precision Driver (Flat Coaxial 2-Way Speaker Unit) The flat coaxial two-way speaker drive unit is an original AuricSound development, designed for the faithful reproduction of mid-range and high-frequency sound. The flat woofer diaphragm has a sandwich-structure using lightweight, high-rigidity carbon fibre skins and a honeycomb core, and is designed for a highly accurate pistonic motion over a frequency range extending beyond the crossover frequency with the tweeter, thus ensuring smooth integration. The flat design eliminates the frequency anomalies due to the cavity effect caused by conventional cone diaphragms, while the magnetic circuit employs a large magnet, copper cap and shorting ring, and a short voice coil with concentrated edgewise winding for high power with low distortion. The drive unit chassis is in highly rigid die-cast aluminium, with the chassis ‘legs’ having a resonance dispersing structure to eliminate even the smallest unwanted vibration, to help the drive unit deliver accurate and powerful bass.

 High Rigidity Entasis Form Cabinet

The M5 cabinet is designed to support the Point Source drive units securely, preventing unwanted resonance and ensuring a smooth flow of sound without diffraction or reflection. The front baffle is designed for maximum stiffness and resonance-damping, while the side panels are convex high-rigidity boards with a maximum 42-mm thickness, designed to damp down resonance while also preventing internal reflections. The monocoque cabinet offers high rigidity, as each side of the cubic structure reinforces the adjacent panels. This reduces unwanted resonance by controlling the movement of the individual panels, as well as that of the structure as a whole, while internal acoustic absorbent material was selected, and its position optimized, to suit both a drive unit and the cabinet volume, thus suppressing undesired standing waves. The bass reflex port on the rear panel is of a ‘parabola’ design, its curvature continuously varying from the inlet to the outlet to suppress turbulence at the exit as well flow-noise within the port, thus delivering smooth and powerful bass sound with minimum noise. The glossy cabinet is created by repeated coating, sanding, polishing and finishing with a high degree of craftsmanship. This creates a cabinet not just attractive to look at, but also able to suppress fine vibrations generated at the enclosure surface, thus contributing to the accuracy of its sound.

High-quality Network Circuit

The High-quality Network Circuit was created as a result of extensive designing and listening, in order to maximize the performance of each speaker unit and achieve a balanced sound. To prevent interference between the drive units and minimize the effect of vibration, separate network boards for woofer and tweeter are optimally arranged inside the cabinet.

Ultra Wide Range Reproduction

The AuricSound Speaker System is capable of reproducing sound over the ultra-wide frequency range of up to 100 kHz to deliver the vast frequency spectrum offered by high-quality, high-resolution music sources. The result is a faithful reproduction of audio signals with all nuances intact.

 

 

 

 

 

 

 

 

THE GLOBAL LEADER IN DESIGN AND MANUFACTURING OF DRIVERS

 

 

 

 

 

 

 

 

DIAMOND DRIVER (made in Germany)

 

 

DIAMOND

What makes Accuton diamond tweeters so special?

The first idea to make a tweeter with a membrane of pure diamond came to our CEO Adrian Bankewitz in 1999 after reading a short note in Scientific American that a group around the physicist Prof. Dr. Peter Koidl had succeeded in making plain disks of artificial CVD diamond. Peter Koidl at this time was the head of the Fraunhofer IAF in Freiburg, Germany and the diamond disks had been invented for military purposes, in this case as protecting windows for outer space infra-red cameras.

 

 

CERAMIC DRIVER (made in Germany)

 

HARD CERAMICS

To understand the advantage of this elaborate production, the general requirements to a speaker cone can be summerized as follows.

It should be substantially 1. easy 2. stiff and 3. provided with high interior absorption. Since these claims are constructive mutually contradictory, all conventional membrane materials are extremly full of compromises. And at least one of the requirements mentioned above can be described as unsatisfactory.

 

 

 Denmark Professional Audio

 

 

 

 

SW-8

A POWERHOUSE WITH STYLE

AuricSound SW-8 wireless subwoofer delivers exceptional bass and will enhance the mood and depth of both a stereo and a cinematic experience, while the distinctive lines and dynamic elegance channel the raw impact of its stunning power. To top it off, the freedom of wireless simplicity allows you to find the perfect spot for AuricSound SW-8 in your home.